歡迎光臨中國銷售中心 在線留言 收藏本站 網站地圖 聯系連訊達
全國服務熱線0755-83999818
當前位置:首頁 ? 技術支持 » 带宽与速率的区别(Bandwidth and Data Rates)

带宽与速率的区别(Bandwidth and Data Rates)

文章出處:深圳市連訊達電子技術開發有限公司 人氣:-发表时间:2019-11-06 15:42:00

When it comes to copper cabling, you’ve probably heard of Category 6 as having a bandwidth of 250 MHz and Category 6A as having a bandwidth of 500 MHz. (The bandwidth is often printed on the cable jacket.)  This creates plenty of confusion since we think of bandwidth on the network as expressed in Mb/s or Gb/s. We are not wrong in that mindset – your Category 6A cable may have an operating bandwidth of 500 MHz, while your network may have a bandwidth of 10 Gb/s.


说到铜缆,你可能听说过6类的带宽是250MHz,6类的带宽是500MHz(带宽通常打印在电缆护套上。)这造成了大量的混乱,因为我们认为网络上的带宽是以Mb/s或Gb/s表示的。我们的想法并没有错——您的6A类电缆的工作带宽可能为500 MHz,而您的网络的带宽可能为10 Gb/s。



So why is category cable bandwidth defined as MHz? Good question. Megahertz is the frequency or rate at which a wave will cycle each second, with 1 hertz equal to 1 cycle per second and 1 MHz equal to 1 million cycles per second. The relationship of speed to frequency is a bit complex, but in simple terms, higher frequencies are needed to carry more bits of data. Each data bit is encoded on a carrier frequency, and the amount of data that can be transmitted per second depends on the signal encoding scheme of the active equipment.


那麽,有同學會問爲什麽類別電纜帶寬定義爲Mhz?這是個好問題。兆赫是波每秒循環的頻率或速率,1赫茲等于每秒1個循環,1兆赫等于每秒100萬個循環。速度與頻率的關系有點複雜,但簡單來說,需要更高的頻率來承載更多的數據位每個數據位在載波頻率上被編碼,並且每秒可以發送的數據量取決于有源設備的信號編碼方案。



Back in the days of Cat 5, the bandwidth and the data rates were the same – 100 MHz cabling could deliver 100 Mb/s.  But designers of network interfaces have been able to develop encoding schemes such as pulse amplitude modulation (PAM) and DSQ128 to go beyond the simple 1:1 relationship of bandwidth to data rate.  By the time Cat 6 came out, they were able to drive 10 Gbps over a cable with a bandwidth of 250 MHz.  This approach is how NBASE-T is able to get 2.5 and even 5 Gbps out of Cat 5e cable and how your cable provider gets you faster internet speeds without recabling the connection to your house.


早在第5类的时代,带宽和数据速率是一样的——100兆赫的电缆可以传输100兆字节/秒。但是网络接口的设计者已经能够开发编码方案,如脉冲幅度调制(PAM)和DSQ128,以超越带宽与数据速率的简单1:1关系,到Cat 6问世时,他们已经能够通过一根带宽为250mhz的电缆驱动10gbps这种方法是NBASE-T如何能够从5e类电缆中获得2.5甚至5 Gbps,以及您的电缆供应商如何在不重新布线的情况下,为您提供更快的网速。




此文關鍵字:fluke,福禄克,網絡測試儀,光纖測試儀,網線測試儀,万用表,红外热像仪,深圳连讯达,深圳市连讯达电子技术开发有限公司